Local Bit (Lb) - Omron NB-series Operation Manual

3 Functions of NB-Designer

3-11-1 Local Bit (LB)

Addresses
9000~9009 Initialization setup is ON.
9010 Download Recipe
9011 Upload Recipe
9012 Download / Upload Recipe
9013 Touch indicator
9014 CPU Indicator
9015 Alarm indicator
9017 Printer control
9018 Enter screen saver state
9019 Exit from screen saver state
9020 Pen (Turn ON under selected state)
9021 Eraser (Turn ON under selected state)
9022 Clear Block (Turn ON under clear block
state)
9030 Pen size of 1 pixel point
9031 Pen size of 2 pixel points
9032 Pen size of 3 pixel points
9040 Hide/Show Menu Screen
9041 Hide/Show task bar
9042 Hide/Show operation button
9043 Hide/show all (Menu Screen, task bar,
operation button)
3-320
Descriptions
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Comments
These bits can be used to make some components turn
ON when the system starts the initialization
(read/write).
The user can use this bit address to confirm the
process of recipe download.
Set it to ON under download state and set it to OFF
after the download is completed (read).
The user can use this bit address to confirm the
process of recipe upload.
Set to ON under uploading status and to OFF after the
upload is completed (read).
The user can use this bit address to confirm the
process of recipe download/upload (read).
Set it to ON when touching the "Touch indicator" (read).
Set it to ON when touching "CPU Indicator" (read).
Set it to ON when touching "Alarm Indicator" (read).
ON-Enable printer; OFF-Disable printer; Enabling the
printing by system parameters is valid (read/write).
This bit will turn to 1 automatically when the system
enters the screen saver state (Backlight), and turn to 0
when the system exits from the screen saver (read).
This bit will turn to 1 automatically when the system
exits from the screen saver state (Backlight), and turn
to 0 when the system enters the screen saver (read).
It is one function of the Notepad.
It is used to judge whether the pen is under the
selected state currently (read/write).
It is one function of the Notepad.
It is used to judge whether the eraser is under selected
state currently (read/write).
It is one function of the Notepad.
It is used to judge whether the block is under "clear
block" state currently (read/write).
It is one function of the Notepad, which can set the pen
size to 1 pixel point (read/write).
It is one function of the Notepad, which can set the pen
size to 2 pixel points (read/write).
It is one function of the Notepad, which can set the pen
size to 3 pixel points (read/write).
Set it to ON/OFF to hide/show the Menu Screen
(read/write).
Set it to ON/OFF to hide/show the task bar (read/write).
Set it to ON/OFF to hide/show the operation button
(read/write).
Set it to ON/OFF to hide/show all the Menu Screens,
task bars and operation buttons (read/write).