1-3
System Configuration
1-3-1
Connectable Peripheral Devices
NB Unit
*1 When using USB to connect NB Unit with the computer, please refer to 2-3-2 Connecting by USB in NB Series
Setup Manual.
*2 When connecting NB
communications.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Host
RS-232C cable (15m max.)
RS-485/RS422 cable (500m max.)
Ethernet *2
RS-232C cable
USB cable *1
Ethernet *2
USB memory
-TW01B and the Host through the Ethernet, the Host should support the Ethernet
With NB-Designer Software installed
PC
Running Windows
1 Introduction
1
1-7