Omron NB-series Operation Manual page 246

3 Functions of NB-Designer
3
Execute Macro
After this function is selected, pressing the Function Key can execute the specified existing
Macro code. (Refer to 3-9-3 Macro Triggering (Page 3-268))
4
Touch Calibration
After this function is selected, pressing the Function Key can make the system go to PT Touch
Calibration Screen, thus allowing the users to perform touch calibrations to the PT.
5
Clear Event
After this function is selected, pressing the Function Key can clear the event information stored
in the recipe memory.
6
Notepad
Function
Pen Color
Pen Size
Clear
For the procedures of operation method about the Notepad, refer to 3-7-7 Notepad (Page 3-
216).
There are four methods to clear the event information:
(a) By clicking the [Function Key] component to clear the event information after the [Clear Event]
option in [Function Key] tab in Function Key Property dialog box being checked. The event
information data stored in the recipe memory can be cleared by this method.
(b) By restarting the PT to clear the event information after the value of special system memory
LW10015 being set to 0. The event information data stored in the recipe memory can be cleared by
this method.
(c) Check in the [Clear Event History] option in [NBManager] dialog box and execute the download,
the event information will be cleared. The event information data stored in the recipe memory and
the event information files stored in the external memory can be cleared simultaneously by this
method.
(d) Check in the [Clear Event History] option in the NBDownload dialog box and execute the download
again. The event information data stored in the recipe memory and the event information files
stored in the external memory can be cleared simultaneously by this method, as shown below:
3-204
Functions of Message Board
Pen Pressing the Function Key means the current function is the pen in
the Notepad.
Eraser Pressing the Function Key means the current function is the eraser in
the Notepad.
Clear Pressing the Function Key can clear the contents in the area selected
Block by the mouse of the Notepad.
For setting the pen color.
For setting the pen size from the eight size available.
Removing all the contents in the Notepad.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)