Omron NB-series Operation Manual page 338

3 Functions of NB-Designer
When LB9163 is ON, the display is flipped; while LB9163 is OFF, the screen is displayed in the normal
direction. Perform the offline test and the effect is as shown below:
Common Sheet Screen Attributes: Determines the Common Sheet for the project program to be
displayed above or below the Base Screen.
Pop-up Screen Attributes: Specify the pop-up screen whether if it is displayed on top of the screens
or not.
Initial Screen: The screen is displayed at first by the PT after the unit is started in user project mode.
The default is Frame 0.
Common Sheet: Refers to the No. of Common Sheet of the project. The default is Frame 1.
Menu Screen: Refers to the No. of Menu Screen of the project. The default is Frame 2.
File Browser Screen: Refers to the No. of Browser File Screen of the project. The default is Frame 5.
Confirmation Screen: Refers to the No. of Confirmation Screen of the project. The default is Frame 7.
Login Screen: Refer to the No. of Login Screen of the project. The default is Frame 9.
Unable-to-Input Display Color:
The role of invalid component marks: When the enable condition isn't met or is invalid, using this option
can set invalid component mark to indicate this component can't be used currently and the touch is not
effective. Only the control components such as switch and Command Button component etc. can use
invalid component marks, and the display components such as Lamp and Word Lamp component etc.
don't support the invalid component marks.
3-296 NB-series Programmable Terminals NB-Designer Operation Manual(V106)