Omron NB-series Operation Manual page 333

3 Functions of NB-Designer
Use Macro when loading project: Refers to the Macro file run firstly when the unit starts processing
the project file after it starts.
Use Buzzer: When the component of the PT is pressed or the "Beep Function" is set for the Alarm or
the Event, check in the check box.
Chinese Font Box Height: Sets the height of text input box and the default value is 24.
When inputting the characters in Pinyin form, the Chinese font box height can be adjusted between 24
and 99 (pixel).
Perform the offline test and the effect is as shown below:
When the Chinese font box height is 24: When the Chinese font box height is 34:
Chinese font box height can be adjusted
3
Use External Clock: After it is checked, the values in the memory of LW9010 to LW9017 are adopted
as the event occurrence time, and internal clock of the PT are not adopted.
Note Using this function needs to use Data Transmission component to transfer the data in the time memory of
PLC to LW9010-LW9017 periodically.
LW9010: Second
LW9011: Minute
LW9012: hour
LW9013: Date
LW9014: Month
LW9015: Year
LW9016: Week (unavailable)
LW9017: Millisecond
In the following example, we will use the Data Transmission component to transfer the values in the time
memory of PLC to LW9010~LW9017 periodically.
i.e. transfer SD100 to LW9015, SD101 to LW9014, SD102 to LW9013, SD103 to LW9012, SD104 to
LW9011 and SD105 to LW9010.
NB-series Programmable Terminals NB-Designer Operation Manual(V106) 3-291