Omron NB-series Operation Manual page 157

2
Go to the [Numeric Data] tab.
Data Format: Sets the data format corresponding to data contained in specified word address
Max/Min Value Setting: Setting the range of input available value.
Over Max/Under Min: Specifying color of the value displayed when it exceeds the Max or the
Flash: When the value of the specified word address is greater than the Max or less than the
Min, the value of the component will be flashed to make the transfinite alarm more
visible.
Proportional Conversion: The value of the specified word address will be converted
For example: it is assumed that the original data is represented by "A" and the displayed data
B = [Minimum Proportional Value] + (A - [Minimum Value of Original Data]) × Proportion
Where, Proportion = ([Maximum Proportional Value] - [Minimum Proportional Value]) /
([Maximum Value of Original Data] - [Minimum Value of Original Data])
Take the following graphics as example, when the original data is 20, then the value after
conversion is 15 + (20-0) × (55-15) / (100-0) = 23, so the value displayed in the component will
be 23.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
and 7 types are available.
Min of the value.
according to the settings and displayed on number input
component. To select this function, [Min Value] and [Max Value]
must be set.
by "B", then the data B can be obtained by the following conversion formula:
3 Functions of NB-Designer
3
3-115