Indirect Screen - Omron NB-series Operation Manual

3-6-16 Indirect Screen

Indirect Screen can make an already created screen pop up on the current screen. Please
refer to [3-4-3 Screen Creation]. Generally, the screen called by the Indirect Screen is smaller than the
full screen (but it can also be of the same size as the full screen). In Indirect Screen specifications, pop-
up displays the screen of the screen No. supporting the stored value of the word address specified to
the [Read Address]. The number arranging indirect screens is not restricted in NB-Designer, but the
pop-up screens can be displayed simultaneously up to 16 screens at max.
Value 0 is used to close the screen, and value -1 means to make screen 0 pop up, while the values
other than 0 or -1 mean to make the corresponding screens pop up.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Command Button,
write address is

Indirect screen,

LW100, setting
read address is
mode is
LW100.
"Set Constant"
Press this button,
pop-up screen 20
screen 20
screen 21
Press this button,
pop-up screen 21
3 Functions of NB-Designer
3
3-143