Table of Contents
Advertisement
The following items have been set in this example.
Entering the respective items:
After selecting each item, press
(1) Category
Telecommand-1: Use the
Telecommand-2
(2) Area
Ship's position: Use the
(3) Call TX/RX freq: Use the
(4) Other settings:
"Work TX/RX freq": Use the numerical keys (
Switching from "Ship's position" to "Work TX/RX freq": Press
Switching from "Work TX/RX freq" to "Ship's position": Press
Note
Set the "Work TX/RX freq" to a frequency in the same band as "Call TX/RX freq".
2. Press
.
CALL
The following screen is displayed and the message is transmitted.
If the tuner is not tuned to the transmission frequency, the "tuner mismatch!!" warning message is
Note
displayed. Press
When the transmission is completed, the following screen is displayed. After a brief interval, operation
returns to the "MENU#1-EDIT&CALL" screen.
To discard the message and quit without sending it, press
Note
To store a message without sending it, press
3-56
Area
N20E120DLAT10LONG50
Category
ROUTINE
Telecommand-1
J3E TEL
Telecommand-2
NO INFORMATION
Work TX/RX freq
4,444.1 4,455.5 kHz
Call TX/RX freq
4,208.0 4,219.5 kHz
ENT
and
and
using the numerical keys (
Alternatively, use the numerical keys (
specify a frequency.
frequency.
AREA CALL
TX frequency
4,208.0 kHz
TX date&time
06.Sep.2001(Thu) 01:30
to tune the tuner, then transmit the message.
ENT
AREA CALL
TX frequency
4,208.0 kHz
TX date&time
06.Sep.2001(Thu) 01:30
to confirm the selection.
keys to select the items.
keys to select the bearing, and then input the value
to
).
0
9
and
keys to select one of the preset frequencies.
to
0
Transmitting
Send Completed
FUNC
(SAVE).
FUNC
9
to
, and
.
0
9
, and
) to directly specify a
9
.
(FREQ).
FUNC
6
(POS).
FUNC
5
(QUIT).
4
) to directly
Hide quick links:
Advertisement
Table of Contents
