Table of Contents
Advertisement
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
The "GROUP CALL" screen is displayed.
The following items have been set in this example.
Entering the respective items:
After selecting each item, press
(1) Group address: Use the numerical keys (
(2) Category
Telecommand-1:
Telecommand-2
(3) Work TX/RX freq Use the numerical keys (
(4) Call TX/RX freq: Use the
(5) Other settings:
"Ship's position": Use the
Switching from "Ship's position" to "Work TX/RX freq": Press
Switching from "Work TX/RX freq" to "Ship's position": Press
Note
Set the "Work TX/RX freq" to a frequency in the same band as "Call TX/RX freq".
3-52
GROUP CALL
Group address
Category
Telecommand-1
Telecommand-2
Work TX/RX freq
Call TX/RX freq
XXXXXXXXX
Group address
Category
ROUTINE
Telecommand-1
J3E TEL
Telecommand-2
NO INFORMATION
Work TX/RX freq
4,444.1 4,455.5 kHz
Call TX/RX freq
4,208.0 4,219.5 kHz
ENT
to confirm the selection.
station (ship or coastal station).
Use the
and
frequency.
and
Alternatively, use the numerical keys (
specify a frequency.
and
value using the numerical keys (
, and then press
7
XXXXXXXXX
ROUTINE
J3E TEL
NO INFORMATION
4,444.1 4,455.5 kHz
4,208.0 4,219.5 kHz
0
to
9
) to enter the address of the receiving
keys to select the items.
to
, and
0
9
keys to select one of the preset frequencies.
keys to select the bearing, and then input the
to
0
.
ENT
Use
and
scroll the screen.
) to directly specify a
.
to
, and
.
) to directly
0
9
).
9
(FREQ).
FUNC
6
(POS).
FUNC
5
to
Hide quick links:
Advertisement
Table of Contents
