Table of Contents
Advertisement
Procedure
Example: Procedure for a distress relay call to all ships
1. From the "MENU#1-EDIT&CALL" screen, press
The "ALL SHIPS CALL" screen is displayed.
ALL SHIPS CALL
Category
Telecommand-1
Dist address
Nature
Dist-position
Dist-UTC
Dist-telecomm
Call TX/RX freq
The following items have been set in this example.
Entering the respective items:
After selecting each item, press
(1) Dist-address: Use the numerical keys (
(2) Category
Telecommand-1: Use the
Nature
Dist-telecomm
(3) Dist-position: Use the
(4) Dist-UTC:
(5) Call TX/RX freq: Use the
Note
Set the "Work TX/RX freq" to a frequency in the same band as the "Call TX/RX freq".
DISTRESS
DISTRESS RELAY
XXXXXXXXX
UNDESIGNATED DIST
12 34'N123 45'E
01:20
J3E TEL
4,208.0 / 4,208.0 kHz
Category
DISTRESS
Telecommand-1
DISTRESS RELAY
XXXXXXXXX
Dist-address
Nature
UNDESIGNATED DIST
Dist-position
12 34'N123 45'E
Dist-UTC
01:20
Dist-telecomm
J3E TEL
Call TX/RX freq
4,208.0 / 4,208.0 kHz
to confirm the selection.
ENT
station (ship or coastal station).
and
and
using the numerical keys (
Use the numerical keys (
and
Alternatively, use the numerical keys (
specify a frequency.
, and then press
6
0
to
9
) to enter the address of the receiving
keys to select the items.
keys to select the bearing, and then input the value
to
).
0
9
to
) to enter the time.
0
9
keys to select one of the preset frequencies.
0
.
ENT
Use
and
to
scroll the screen.
to
, and
) to directly
9
.
3-49
Hide quick links:
Advertisement
Table of Contents
