Table of Contents
Advertisement
Area call setting
An area call is received by all ships navigating in a designated geographical area. For the area of called
stations (PARTY AD), latitude, longitude, deviation latitude (from North to South), and deviation longitude
(from West to East) are necessary. The area of the shaded part is designated in the figure below.
N
20
10
W
120
S
First, select the direction from N.E. (North-East), N.W. (North-West), S.E. (South-East), and S.W. (South-
West). In this example, the direction is N.E.
PARTY AD
Next, enter 20°, 120°, making this latitude 20° and longitude 120°.
PARTY AD
In addition, as the deviation latitude (DLAT) and deviation longitude (LONG) are, respectively, 10° and 50°,
input 1050..
PARTY AD
Finally, press
ENT
to confirm the area.
Up to 99° can be input for deviation latitude and deviation longitude.
Note
Ranges that include the Arctic Pole or Antarctic Pole cannot be specified.
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
The "AREA CALL" screen is displayed.
Reference point
Deviation latitude (DLAT)=10°
170
Deviation longitude (LONG)=50°
N E
DLAT LONG
N20E120 DLAT LONG
N20E120DLAT10LONG50
AREA CALL
Area
Category
Telecommand-1
Telecommand-2
Work TX/RX freq
Call TX/RX freq
E
, and then press
8
Transmissible
N20E120DLAT10LONG50
ROUTINE
J3E TEL
NO INFORMATION
4,444.1 4,455.5 kHz
4,208.0 4,219.5 kHz
.
ENT
Use
and
to
scroll the screen.
3-55
Hide quick links:
Advertisement
Table of Contents
