Table of Contents
Advertisement
(2) Reading a Distress/Urgent Message
Messages are loaded at the "DSC watching" screen.
ATTENTION
To prevent unnecessary distress message relay transmission, the NCT-196N automatically deletes
distress/urgency messages after 48 hours since these received. Thus the procedure above-
mentioned to read distress message received is invalid at that time.
Procedure
1. Check that the "DSC watching" screen is displayed.
DSC watching
12 34'N123 45'E SPEED:12.4KT at 01:26
Self-ID = XXXXXXXXX
If the "DSC watching" screen is not displayed, press
Note
"DSC watching" screen.
On the screen
2. Press
MENU
The "MENU#1-EDIT&CALL" screen is displayed.
MENU #1-EDIT&CALL
1.Individual call
2.Acknowledgement call
3.Distress call
4.Distress relay call
5.Auto/semi-auto call
6.All ships call
7.Group call
8.Area call
9.Position request
10.Polling call
11.Test call
3. Press
MENU
The "MENU#2-READOUT&SETUP" screen is displayed.
MENU #2 -READOUT&SETUP
1.Received distress message readout
2.Received others message readout
3.Setup
4.Self test
3-26
06.Sep.2001(Thu) 01:26
mark is displayed when no printer is connected to the NCT-196N.
P
.
again.
P
[UTC]
STOP
3 times in succession to switch to the
Select no.
Use
and
Select no.
to scroll.
Use
and
to scroll.
Hide quick links:
Advertisement
Table of Contents
