Table of Contents
Advertisement
DISTRESS SETUP
This function is used to compile a distress call message to be transmitted by pressing
Nature
: UNDESIGNATED DIS
Position
: 12 34'N123 45'E
Time
: 19:00
Telecommand : J3E TEL
Tx frequency : 2187.5kHz
"Telecommand" shows the follow-on communication mode with the RCC that received the distress message.
Normally, select either radiotelephone mode or MF/HF ARQ communication (F1B/J2B ARQ).
"Tx frequency" shows a transmission frequency for DSC distress message calls. When the radio equipment is set
to 2187.5 or 8414.5kHz, those frequencies take priority.
Procedure
1. From the "SETUP" screen, press
The "DISTRESS SETUP" screen is displayed.
DISTRESS SETUP
Dist-telecomm
Dist-TX/RX freq
2. Enter each item.
Use
and
Press
to confirm a setting.
ENT
See Section 4.3.3 (3), "Distress Call" for items for which "Telecommand" can be selected.
3. On completion of entering the data, press
Operation returns to the "SETUP" screen.
Note
Press
FUNC
3-70
FIXED
AUTO or MANUAL The navigation equipment data or manually
AUTO or MANUAL The navigation equipment data or manually
VARIABLE
VARIABLE
J3E TEL
2,187.5kHz
to change a setting and
, and then press
4
(QUIT) to cancel this menu.
Nature of the distress (undesignated distress)
entered data.
entered data.
The data set using this menu.
The data set using this menu.
and then press
5
ENT
and
to move the cursor and select the item.
, and then press
FUNC
DISTRESS
.
.
(SAVE).
9
Hide quick links:
Advertisement
Table of Contents
