Fec Communication; Sfec Communication - JRC JSS-296 Instruction Manual

3.6.3

FEC Communication

There are two types of FEC modes such as SFEC (Selective FEC) in which a destination is specified and CFEC
(Collective FEC) in which the destination is not specified. The ways to communicate using FEC modes are
described below. Note that the FEC receiving is automatic so the operation method is left out in this section, and
furthermore CFEC receiving can be disabled using NBDP setup. (See "6.1 NBDP settings.)

3.6.3.1 SFEC Communication

ATTENTION
Before transmitting, confirm that the selected channel / frequency is not occupied by other station(s).
Procedure
1. Select Connect
2. Select a partner station from the following window and press Enter key.
If [ Manual ] button is selected using Tab and Enter keys, the partner ID and Frequency/Channel can
Note
be set manually.
3.
FEC SFEC and press Enter key.
3-81