Table of Contents
Advertisement
3.6.2
ARQ Communication
ARQ mode is two way telex communication with a partner as a destination station. When beginning to call a
partner using ARQ mode, it is necessary to select a partner (ID) and a communication channel. The operation from
the beginning until the end of the communication with a partner are described in this section.
ATTENTION
Before transmitting, confirm that the selected channel / frequency is not occupied by other station(s).
Do not operate JSB-196 during ARQ communication.
Procedure
1. Select
Connect
2. Select a partner station from the following window and press Enter key.
If [ Manual ] button is selected using Tab and Enter keys, the partner ID and Frequency/Channel can
Note
be set manually.
ARQ
and press Enter key.
3-77
Hide quick links:
Advertisement
Table of Contents
