Table of Contents
Advertisement
(2)
Useful Functions
The NCT-196N register up to six party addresses with a shorthand name, and up to six calling frequencies.
The registered contents are retrieved by using
enter numbers.
The addresses and calling frequencies are stored from the "SETUP" screen. See steps 1 to 3 of (1) Specifying the
scanning frequency" for how to display the "SETUP" screen.
SETUP
1. Date&time edit
2. Position edit
3. Calling frequency registration
4. Address registration
5. Distress setup
6. Others alarm setup
7. Automatic acknowledgement setup
8. Scanning setup
9. Watchkeeping receiver setup
Registering a calling frequency
Procedure
1. From the "SETUP" screen, press
The "CALLING FREQUENCY REGISTRATION (TX/RX)" screen is displayed.
CALLING FREQUENCY REGISTRATION (TX/RX)
[1] 12,345.6/12,356.7 kHz (
[2]
[3]
[4]
[5]
[6]
2. Enter the "Transmit frequency/Receive frequency (name)" for each channel.
Enter the transmit frequency/receive frequency pair using
Enter (name) as follows: 1. Selecting characters: Use
To go to the next channel or skip to the next channel without specifying a name, press
3. On completion of entering the data, press
Tune regist frequency?
Press
to tune the tuner and then return to the "SETUP" screen.
ENT
Press
to abort tuning and return to the "SETUP" screen.
STOP
Note
Press
CLR
Note
Press
FUNC
3-66
and
Select no.
NONE / NONE
NONE / NONE
NONE / NONE
NONE / NONE
NONE / NONE
2. Confirming characters: After selecting each character, press
[ENT] key
TUNE
[STOP] key
NO TUNE
to delete registered calling frequency.
, and then press
(QUIT) to cancel this menu.
4
when compiling a call message, obviating the need to
, and then press
3
)
kHz (
)
kHz (
)
kHz (
)
kHz (
)
kHz (
)
to
0
and
parentheses ().
, and then press
FUNC
Use
and
to
scroll the screen.
.
ENT
Use
and
to
scroll the screen.
and
.
9
.
to select characters inside the
ENT
ENT
(SAVE).
9
.
two times.
Hide quick links:
Advertisement
Table of Contents
