JRC JSS-296 Instruction Manual page 104

(3) Printing function
When a printer is connected, all received messages are printed out upon reception. In addition, it is also possible to
print out other stored information.
The printing function enables the followings and the procedures are described in this section.
The printing of all of the files, which classification is selected from the print menu.
The printing of a selected file, which contents is displayed on screen.
Printing from the print menu (batch printing of multiple files)
Procedure
1. Check that the "DSC watching" screen is displayed.
DSC watching
12 34'N123 45'E SPEED:12.4KT at 01:26
Self-ID = XXXXXXXXX
If the "DSC watching" screen is not displayed, press
Note
"DSC watching" screen.
When the
2. Press , and then
FUNC
The "PRINT MENU" screen is displayed.
PRINT MENU
1 ALL RECEIVED DISTRESS MESSAGES
2 ALL RESEIVED OTHERS MESSAGES
3 ALL EDIT CALL MESSAGES
4 ALL SETUP INFORMATION
3. Select the item to be printed, and then press
Printing starts.
4. When printing is finished, press
Operation returns to the "DSC watching" screen.
Printing a specified file
Procedure
1. Press
MENU
The "MENU#1-EDIT&CALL" screen or "MENU#2-READOUT&SETUP" screen is displayed.
2. Enter the number of the file to be printed, and then press
The file content is displayed.
3. Press , and then press
FUNC
The displayed file is printed.
4. When printing is finished, press
Operation returns to the"MENU#1-EDIT&CALL" screen or "MENU#2-READOUT&SETUP" screen.
3-68
06.Sep.2001(Thu) 01:26
mark is displayed on the screen, no printer is connected to the NCT-196.
P
(PRINT).
3
once or twice.
3
[UTC]
STOP
3 times in succession to switch to the
.
ENT
FUNC , and then press
(PRINT).
, and then press
FUNC
Use and to
scroll the screen.
(QUIT).
4
.
ENT
(QUIT).
4