Table of Contents
Advertisement
(4) Other settings
The following procedures are explained in this section:
How to compile the message transmitted when pressing
How to set the auto acknowledgement to ON/OFF for an acknowledgment required call
Other settings.
ATTENTION
Pay close attention when inputting and/or modifying the information described in this section as the contents
are critical for operating the DSC. If these operations are unclear, contact JRC or our agents.
The data is input using the "SETUP" screen. See the above-mentioned "Specifying the scanning frequency" 1-3
steps of "(1) Frequency scanning" for how to display the "SETUP" screen. However regarding the "DATE&TIME
EDIT" and "POSITION EDIT" settings in this setup menu, see Section 4.2 "Setting Position and Time Data".
SETUP
1. Date&time edit
2. Position edit
3. Calling frequency registration
4. Address registration
5. Distress setup
6. Others alarm setup
7. Automatic acknowledgement setup
8. Scanning setup
9. Watchkeeping receiver setup
.
DISTRESS
Select no.
Use
and
to
scroll the screen.
3-69
Hide quick links:
Advertisement
Table of Contents
