List Of Shortcut Keys - JRC JSS-296 Instruction Manual

3.4.3.13 List of shortcut keys

The following shortcut keys are provided for easy selection of menu items.
Using a shortcut key: The expression "1. Press
procedure steps can be substituted by " Press
keypad".
Shortcut key
Menu item
MODE
POWER
AGC
SQUELCH
SCAN
SCAN SPD
USR MEMO
GRP MEMO
METER
ATS
ATS WAIT
BEEP
SPEAKER
CHECK
VERSION
Note
In JSS-296, Control unit's version must be 2.00 or later.
number
1 Select the communication mode.
TEL (J3E), DSC (F1B), TLX (F1B), CW (A1A), AME (H3E)
2 Set the output power to low (50 watts).
3 Select the AGC (Auto Gain Control) function.
4 Adjust the squelch level.
5 Enable the scanning function.
6 Set the scanning time.
7 Register the user channel.
8 Register the channel group name.
9 Select the bar-meter function.
ANT: antenna current, PWR: output power.
10 Enable the ATS (Automatic Tuning Start) function.
11 Set the wait time for the ATS function.
12 Disable the key-in sound panel.
13 Disable the output of the built-in loudspeaker.
14 Perform the Self Diagnosis function.
15 Display the farm-ware version on Control unit CDJ-1960, DSP,
Antenna Tuner and Power Amplifier.
, then turn the Jog Dial" in the above
MENU
and input its shortcut key number with
MENU
Function
3-21