Table of Contents
Advertisement
WATCHKEEPING RECEIVER SETUP
This procedure sets the Watch-keeping receiver's scanning frequency. The 2187.5kHz and 8414.5kHz frequencies
are preselected; here, frequencies are selected for the other four channels.
The "DISTRESS FREQUENCY" lamps (on the front panel) are turned ON/OFF for each set channel. The lamps for
2187.5kHz and 8414.5kHz are always ON.
Procedure
1. From the "SETUP" screen, press
The "WATCHKEEPING RECEIVER SETUP" screen is displayed.
WATCHKEEPING RECEIVER SETUP
CH1. 2187.5kHz
CH2. 4207.5kHz
CH3. 6312.0kHz
CH4. 8414.5kHz
CH5. 12577.0kHz
CH6. 16804.5kHz
2. Select "ON" or "OFF".
The default setting is "ON". Use
Press
to confirm the setting.
ENT
The corresponding lamp for that frequency is turned ON or OFF according to the setting.
3. On completion of entering the data, press
Operation returns to the "SETUP" screen.
Note
Press
FUNC
ON const
ON
OFF
ON const
OFF
ON
and
, and then press
4
(QUIT) to cancel this menu.
and then press
9
ENT
to change the setting.
, and then press
FUNC
.
Use
and
to
scroll the screen.
(SAVE).
9
3-73
Hide quick links:
Advertisement
Table of Contents
