Table of Contents
Advertisement
Entering the respective items:
After selecting each item, press
(1) Address: Use the numerical keys (
station (coastal or ship station).
(2) Category
Telecommand-1: Use the
Telecommand-2
(3) Ship's position:
(4) Call TX/RX freq: Use the
(5) Other settings:
"Work TX/RX freq": Use the numerical keys (
Switching from "Ship's position" to "Work TX/RX freq": Press
Switching from "Work TX/RX freq" to "Ship's position": Press
Note
Set the "Work TX/RX freq" to a frequency in the same band as "Call TX/RX freq".
4. Press
.
CALL
The following screen is displayed and the message is transmitted.
INDIVIDUAL CALL
TX frequency : 4,208.0 kHz
TX date&time : 06.Sep.2001(Thu) 01:30
When the transmission is completed, the following screen is displayed for a while, and the message is
saved. After that returns to the "MENU#1-EDIT&CALL" screen.
INDIVIDUAL CALL
TX frequency : 4,208.0 kHz
TX date&time : 06.Sep.2001(Thu) 01:30
Refer to the example in "(6) ALL SHIPS CALL" for information on the DISTRESS RELAY procedure.
Note
To store a message without sending it, press
To discard the message and quit, press
to confirm the selection.
ENT
to
0
and
Use the
and
ship's position using the numerical keys (
and
the numerical keys (
0
directly.
Transmitting
Send Completed
FUNC
FUNC
) to specify the address of the destination
9
keys to select the items.
keys to determine the direction, and then input the
to
0
keys to select one of the preset frequencies, or use
to
,and
) to specify a frequency directly.
9
.
to
,and
0
9
FUNC
FUNC
9
(SAVE).
(QUIT).
4
9
).
) to specify a frequency
.
(FREQ).
6
(POS).
5
3-33
Hide quick links:
Advertisement
Table of Contents
