Replacing Of The Registration Roller Bearings And Registration Roller Gears 1, 2 - Konica Minolta bizhub 200 Service Manual

3. Periodical check
3.5.9 Replacing of the Registration Roller Bearings and Registration Roller
Gears 1, 2
[4]
[2]
[3]
[5]
[6]
[7]
[9]
30
1. Open the Right Door [1].
[1]
4040F2C540DA
2. Remove two E-rings [2], Registration
4040F2C544DA
3. Remove the screw [5] and the
4040F2C545DA
[8]
• When reinstalling the ground plate,
4040F2C546DA
4. Remove the spring [9] and two Reg-
[10]
NOTE
• When reinstalling the bearings,
4040F2C547DA
Field Service Ver. 2.0 Apr. 2006
Roller Gears 1 [3] and Registration
Roller Gears 2 [4].
ground plate [6].
CAUTION
make sure that the ground plate [7]
is in contact with the side faces of
the bushings [8].
istration Roller Bearings [10].
make sure that the flanges of the
bearings are on the outside.