Mfbs Board - Konica Minolta bizhub 200 Service Manual

6. Other
6.3.19

MFBS Board

1. Remove the Upper Rear Cover.
See P.50
2. Remove the IR Right Cover.
See P.51
[1]
[3]
[5]
62
3. Unplug the connector (CN7) [1].
[2]
NOTE
• If the Fax Kit is mounted, discon-
nect the two connectors (CN7 [1],
CN6 [2]).
4040F2C693DA
4. Remove three screws [3] and the
[4]
4040F2C694DA
5. Remove five screws [5] and the
[6]
NOTE
• Remove the Hard Disk if one is
[5]
mounted.
4040F2C751DA
6. Remove the stopper, RAMS Board
[10]
[8]
7. Remove the MFBS Board [9].
NOTE
[9]
• Remove the MEM Board [10] if
mounted in the expansion slot.
[7]
4040F2C752DA
Field Service Ver. 2.0 Apr. 2006
MFBS Board Assy [4].
MFBS Board mounting bracket [6].
[7], and MEMS Board [8].