Exposure Unit - Konica Minolta bizhub 200 Service Manual

6. Other
[5]
[3]
6.3.31

Exposure Unit

1. Remove the IR Upper Left Cover.
See P.49
2. Remove the Front Holding Bracket.
See P.49
3. Remove the Original Glass.
See P.49
[5]
[6]
78
4. Remove the spring [3], two screws
[4]
4040F2C690DA
4. Slide the Exposure Unit [1] to the
[1]
4040F2C700DA
5. Remove two screws [2].
[3]
6. Remove the screw [3] and the flat
[4]
7. Remove the flat cable [5] and the
8. To reinstall, reverse the order of
NOTE
• If the Exposure Unit has been
[2]
See P.215
4040F2C701DA
Field Service Ver. 2.0 Apr. 2006
[4] and the scanner motor [5].
removal position.
cable [4].
Exposure Unit [6].
removal.
removed, be sure to make the Scan-
ner positioning adjustment.