Replacing Of The Toner Filter (Main Unit); Replacement Of The Ozone Filter - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.0 Apr. 2006
3.5.12

Replacing of the Toner Filter (Main Unit)

[1]
[3]
3.5.13

Replacement of the Ozone Filter

1. Remove the screw [1] and the Toner
Filter Rear Cover [2].
[2]
4040F2C558DA
2. Pull on the tape portion [3] and peel
off the Toner Filter (Main Unit) [4].
NOTE
[4]
• When mounting the filter, not the
correct mounting position that is
shown on the left.
• Replace the Developing Unit with a
new one at the same time.
4040F2C557DA
1. Remove the Upper Rear Cover.
See P.50
2. Remove the Rear Cover.
See P.51
3. Remove the Ozone Filter [1].
[1]
4040F2C559DA
3. Periodical check
33