Konica Minolta bizhub 200 Service Manual page 84

Field Service Ver. 2.0 Apr. 2006
[2]
14. Call the Tech. Rep. Mode to the screen.
See P.150
15. Select [ROM Version].
16. Make sure if the version of Firmware is updated.
9. Select [Engine] and touch [Enter].
NOTE
• Touch [Finisher] also if the Finisher
firmware is to be upgraded at the
same time.
4040F2E768DA
10. Select [Yes] and touch [Enter].
4040F2E769DA
11. The firmware upgrading sequence
will start.
NOTE
• The firmware upgrading sequence
will last for 5 to 6 min. During this
period, NEVER turn off the machine
power.
• If the Finisher firmware is also
4040F2E770DA
upgraded, the entire sequence will
take about 10 to 11 min.
12. When the upgrading sequence is
completed, turn OFF the main power
switch.
4040F2E771DA
13. Remove the compact flash card [2]
from the slot. After some while there-
after, turn ON the main power switch.
4040F2C597DA
5. Firmware upgrade
45