Security Setting - Konica Minolta bizhub 200 Service Manual

8. Utility/Counter Mode
8.5.12

Security Setting

NOTE
1
Confirm items shown below before setting enhance security system. If any following
items are not set, security setting menu is not shown.
• Make sure the numbers of administrator code are not all the same.
• Make sure the numbers of service code are not all the same.
• If HDD is mounted, make sure HDD lock password is set.
• Make sure CS Remote Care is not set.
• Make sure SSL certification is made with PSWC.
To mount the optional HDD when enhance security mode is set ON, turn OFF the
enhance security mode first.
A. Enhance Security
1
Functions • To set weather or not to enhance security system.
• If enhance security is set [ON], the following items are assured.
• Password regulation is applied.
• Unauthorized access penalty system becomes available, and if wrong password is
entered three times continuously at operations that require password authentication,
password entering will be rejected.
• Setting of Software DIPSW cannot be changed.
• [User List] is not shown among the keys displayed on user authentication.
Use • Print without authentication cannot be used.
• Auto reset cannot be set [OFF].
If auto reset is set [OFF] before adopting enhance security, the time is changed to [1
min.].
• Restrict One Touch Editing become available.
• HDD Temporary Overwrite Data become available.
• Some menus of Tech. Rep. Mode are not shown.
• Setting of network MIB cannot be changed.
1. Press [Enhance Security].
Setting/
2. Select ON and press [Enter].
Procedure
3. Turn OFF/ON the main power.
B. Unlock
1
Functions • To unlock the password entering after wrong password is entered (three times).
Use • To unlock the password entering after wrong password is entered (three times).
1. Press [Unlock].
Setting/
2. Select the menu to be unlocked and press [Enter].
Procedure
3. Turn OFF/ON the main power.
C. SSL/TLS
1
• To set whether or not to use SSL/TLS for HTML communications.
Functions
* If enhance security mode is set ON, menu is not shown.
Use • To use SSL/TLS for communications.
• The default setting is "OFF".
Setting/
Procedure
140
ON "OFF"
Field Service Ver. 2.0 Apr. 2006