Telephone Operation; Incoming Call; Making Call - Mercedes-Benz COMAND Operating Instructions Manual

Telephone operation

128
Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
Select Reception Volume Reception Volume
X
Transmission Volume Transmission Volume
confirm.
Select a volume setting by turning cVd the
X
COMAND controller.
To close the setting scale: press W or
X
slide XVY.
i
Incorrect settings may have an impact on
the quality of calls.
Telephone operation

Incoming call

Accepting a call
Example: incoming call
To accept: confirm
X
W.
or
Press the 6 button on COMAND or on
X
the multifunction steering wheel.
i
You can also accept the call by voice
command using the Voice Control (see the
separate operating instructions).
Once you have accepted the call, you can use
hands-free mode.
The call volume can be adjusted (
Other functions during a call (
If the phone number of the caller is
transferred, it appears in the display.
or
and press W to
Accept Accept by pressing
page 28).
Y
page 129).
Y
If an entry for the caller exists in the phone
book, you will also see the name.
If the phone number is not transferred or if
the "Hide data" function is active,
shown in the display.
i
You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
press the % back button next to the
R
COMAND controller and then
accept the call using the 6 button on
R
the multifunction steering wheel
Rejecting a call
To reject: select Reject Reject
X
the COMAND controller and press W to
confirm.
or
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
Making a call
Using the number keypad
Call up the telephone basic menu
X
( page 127).
Y
Enter the digits using the number keypad.
X
To connect the call: press the 6
X
button on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
Call up the telephone basic menu
X
( page 127).
Y
Unknown Unknown is
by turning cVd