Advertisement
Operation
1.
Turn ignition and radio "ON"
2.
Press "CD" button on radio
Note: If radio does not switch to CD, cycle ignition OFF/ON and try again.
3. Launch smart device music app
4. Use radio volume control button to set the playback level.
device volume is set 85% or more. If playback is distorted, lower
volume on device.
Warning: Playlist and Track selection is *NOT* possible from the radio.
You must use the iPod built-in controls to access music files
5. If correct operation is confirmed go ahead and reinstall radio.
Fig. 7
1999-Up radios with digital optic port
Frequent ask questions & Troubleshooting
1.
2.
Make certain
3.
4.
5.
6.
7.
Disclaimer
do not apply
• This product has no affiliation with Mercedes Benz, Alpine or Becker
• We're not liable for misuse of this product.
Email
© 1995-Feb-22 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
Does the A2D-MBR work in vehicles with CD changer?
YES;
but the CD changer must be disconnected.
Does the A2D-MBR work on all Mercedes radios?
NO;
works on 1994-98 Becker BE1492, BE1692, BE2210, BE1350) Alpine
CM2296 and CM2396 radios.
Note: In some countries, the above-mentioned radios were installed in
vehicles as early as 1992 and up until early 1999; however, late 1999-
Up Mercedes Audio 10, 20, 30, 50 PCM etc. (See Fig. 7) are not
compatible.
Can I control Smartphone or Tablet from the radio buttons?
NO;
Except volume; you must use Smartphone or Tablet built-in controls
and display or optional wireless remote control.
My Mercedes radio also has the 10-pin connector seen in Fig. 6. Does
the A2D-MBR work on these radios?
NO;
Mercedes radios with digital port (e.g., Audio 10, 20, 30, 50, PCM)
are NOT compatible.
Will I be able to make phone calls using this module?
NO; Purchase our
A2DIY-MBCD
What happens when streaming music app and a call comes in?
Streaming is muted, call number announced. Answer call using handset.
Streaming resumes once call has ended.
Can I pair or save more than one device to the A2D-MBR?
YES;
more than one device (slaves) can be paired however only one
connection can be active at a time.
support@discountcarstereo.com
Advertisement
