Mercedes-Benz COMAND Operating Instructions Manual page 264

Selecting the area for the weather forecast
262
i
COMAND receives weather forecast data
from the nearest weather station at the
selected location.
Selecting the location in the
information chart
"Selecting the area for the weather forecast" menu
Select Position Position
X
by turning cVd the COMAND controller
and press W to confirm.
A menu appears.
To select the current vehicle position:
X
select Current Position Current Position
confirm.
COMAND receives the weather data for the
current vehicle position from the nearest
weather station and displays it
automatically.
To select the vicinity of the
X
destination: select
the menu by turning cVd the COMAND
controller and press W to confirm.
i
You can select
a route has been calculated (
The menu item is otherwise grayed out.
in the information chart
and press W to
Near Destination Near Destination in
Near Destination Near Destination once
page 62).
Y
Selecting a state (searching for winter sport areas)
To select winter sport areas: select
X
Winter Sports Areas Winter Sports Areas
confirm by pressing W.
Select a state, e.g. Colorado Colorado, and press
X
W to confirm.
Select a winter sports area from the menu
X
and press W to confirm.
The weather data and other information is
displayed for the winter sports area that
has been selected. The data is supplied by
the nearest weather station.
The information chart shows the following
information (if available):
ski slopes/ski lifts
R
snowboarding and nighttime opening
R
snow conditions (e.g. snow depth)
R
temperature
R
In In
in the menu, and