Mercedes-Benz COMAND Operating Instructions Manual page 218

®
Bluetooth audio mode
216
Starting/stopping playback
To start playback: select Ì by sliding
X
VÆ and turning cVd the COMAND
controller and press W to confirm.
Playback starts. É is selected.
To stop playback: select É by turning
X
cVd the COMAND controller and press
W to confirm.
A message appears. Ì is selected.
To continue playback: select Ì by
X
turning cVd the COMAND controller and
press W to confirm.
A message appears. É is selected.
Restarting playback after stopping
During the search for mobile phones, the
connection with the Bluetooth
is terminated ( page 123). In the
Y
®
Bluetooth audio basic display (
you will see the No Bluetooth Audio No Bluetooth Audio
Device Connected Device Connected
Connect Connect Last Last Device Device
selected.
When the search is finished, the Bluetooth
audio device can be reconnected.
Confirm Connect Last Device Connect Last Device
X
pressing W.
Depending on the Bluetooth
used, playback starts immediately or you
must start playback manually.
®
audio device
page 215),
Y
message and the
menu item cannot be
®
by
®
audio device
In this case, you will see the
Audio Device Paused Audio Device Paused
To start playback: select Ì by turning
X
cVd the COMAND controller and press
W to confirm.
Playback resumes from the beginning.
Selecting a track
This function is not supported by all
®
Bluetooth audio devices.
To skip forward or back to a track: press
X
the E or F button on COMAND.
or
Press the 9 or : button briefly on
X
the multifunction steering wheel.
Rapid scroll: press and hold the 9
X
or : button on the multifunction
steering wheel until the desired track is
reached.
If you press and hold the 9 or :
button, the rapid scrolling speed is
increased.
Selecting playback options
®
If the Bluetooth audio device supports the
corresponding function, the following options
are available:
Normal Track Sequence Normal Track Sequence
R
The tracks are played in the normal order
(e.g. track 1, 2, 3, etc.).
Bluetooth Bluetooth
message.