Notes - Mercedes-Benz COMAND Operating Instructions Manual

Satellite radio
186
Select a channel by turning cVd the
X
COMAND controller and press W to
confirm.
or
Press a number key on the control panel,
X
e.g. 4, at any time.
Displaying station information
This function is only available for analog FM
programs and digital AM/FM programs (HD
Radio™).
Information relevant to the current station is
shown below the main function bar.
Select Show Station Information Show Station Information
X
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
Depending on the previous status, you
switch Show Station Information Show Station Information
O or off ª.
Displaying program information
This function is only available for analog FM
programs and digital AM/FM programs (HD
Radio™).
Information relevant to the current station is
shown in the display window.
Select Info Info in the radio display by sliding
X
VÆ and turning cVd the COMAND
controller and press W to confirm.
Information on the currently selected
station is displayed. Content is dependent
on the station.
To return to the radio display: confirm
X
Info Info by pressing W.
Slide ZV the COMAND controller up.
X
Satellite radio
Important notes
i
The satellite radio mode described below
requires optionally available satellite radio
equipment and registration with a satellite
radio provider.
i
Note that the categories and channels
shown in the illustrations depend on the
by
program content offered by the provider.
The program content may vary. The
illustrations and descriptions in these
operating instructions may therefore differ
on
from the channels and categories offered
by the provider.
Satellite radio mode may be temporarily
unavailable or interrupted for a variety of
reasons. These reasons include
environmental or topographical conditions
as well as other issues beyond the control
of Mercedes-Benz USA, LLC. This means
operation may not be possible in certain
areas.
These include:
tunnels
R
parking garages
R