Mercedes-Benz COMAND Operating Instructions Manual page 195

i
It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20
seconds, the display returns to the
magazine menu.
The DVD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc.
R
Full magazine tray (eject function is
:
available)
Empty magazine tray (disc can be
;
inserted)
To exit the menu: press the V eject/
X
load button again or press the % back
button.
or
Select Back Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
To fill empty magazine trays: press the
X
V load/eject button.
The magazine menu appears.
Select Fill Empty Slots Fill Empty Slots.
X
You see the Please Wait... Please Wait...
COMAND switches to the next free
magazine tray. You then see the
insert disc <x> insert disc <x> message.
i
Do not insert a disc into the magazine tray
until you have seen this prompt.
Insert a disc into the disc slot with the
X
printed side facing upwards.
You see the Please Wait... Please Wait...
Once the disc is loaded, the DVD changer
Audio CD/DVD and MP3 mode
switches to the next empty tray. You see
the Please insert disc <x> Please insert disc <x>
Repeat this step until all trays are loaded.
X
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
it is a permissible type.
To cancel loading: press the V eject/
X
load button again or press the % back
button.
i
If you cancel loading with the % back
button, the system loads and plays the last
CD you inserted.
Ejecting discs from the DVD changer
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
To eject a CD/DVD: press the V load/
X
eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
Eject possible
:
Type of data medium
;
message.
Disc name (only if stored on the disc)
=
Current disc
Please Please ?
message.
193
message.
Z