Telephone*
Telephone operation
Telephone operation
Switching telephone operation on
Automatically
The telephone* is automatically activated
when the COMAND is switched on. The
mobile phone must be inserted in the
mobile phone cradle* at the time
COMAND is switched on.
Manually
Press a.
The menu to enter the unlock code
( page 107) will appear (only if phone
has been locked before).
104
GSM mobile phone:
Enter the PIN and, if necessary, the
unlock code for the mobile phone.
If no SIM card is in the telephone,
the message
Check SIM Card
pears.
i
In this case, you can dial the emergen-
cy call
911
on the telephone only.
Insert a SIM card. Refer to the mo-
bile phone operator's manual.
Switching telephone operation off
Switch the COMAND off ( page 34) or
turn off the engine.
The telephone* is switched off with a
time-lag of around 10 minutes. You
cannot make an outgoing call or accept
an incoming call within that time.
or
In the Telephone menu ( page 106),
press a longer than two seconds.
The message
Deactivating Tele-
ap-
phone
will appear.