Call Lists - Mercedes-Benz COMAND Operating Instructions Manual

Using call lists
136
Select Yes Yes or No No
X
If you select Yes, a selection list will appear Yes
containing the five existing numbers.
If you select No, the process will be aborted. No
Select the number to be overwritten by
X
turning cVd the COMAND controller and
press W to confirm.
An input menu appears. The data field for
entering the new phone number is
highlighted.
Enter characters (
X
Store an entry (
X
Y
Using call lists
Introduction
While the telephone is being used, COMAND
stores individual lists for both incoming and
outgoing calls (including missed calls). Call
lists are not available unless a mobile phone
is connected to COMAND.
COMAND supports the PBAP Bluetooth
profile. How COMAND processes call lists
depends on the model of the mobile phone
connected:
Bluetooth ® telephone with PBAP
R
®
Bluetooth profile:
The call lists are downloaded automatically
from the mobile phone by COMAND as
soon as the mobile phone is connected to
COMAND.
®
Bluetooth telephone without PBAP
R
®
Bluetooth profile:
COMAND creates the call lists from both
incoming and outgoing calls (including
missed calls) as soon as the mobile phone
is connected to COMAND.
i
®
For Bluetooth
®
PBAP Bluetooth
COMAND are not synchronized with those
on your mobile phone. These calls may or
may not be listed on your mobile phone,
depending on the model.
and press W to confirm.
page 32)
Y
page 33)
®
telephones without the
profile, the call lists in
i
If no mobile phone is connected, then the

Call Lists

Call Lists menu item is grayed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND, the previously available call lists
and their entries will be deleted
automatically. They are still available on the
mobile phone itself.
i
You will only be able to select the
respective menu items once calls have
been received or dialed from COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry
Press the % function button.
X
Select Call Lists Call Lists in the telephone basic
X
menu by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
A menu appears.
Select Calls Received Calls Received
X
Dialed Dialed by turning cVd and press W to
confirm.
The corresponding list appears.
i
You can also call up the list of dialed calls
by pressing the 6 button when the
telephone basic menu is shown. In this
case, the list will only show phone
numbers.
Select an entry by turning cVd the
X
COMAND controller.
To dial a phone number: press W.
X
To close the list: select the & symbol
X
and press W to confirm.
or
Press the % back button.
X
or Calls Calls