Moving - Mercedes-Benz COMAND Operating Instructions Manual

Moving the map
Showing the crosshair
Map with crosshair
Current vehicle position
:
Crosshair
;
Details of the crosshair position
=
Map scale selected
?
To hide the menu: slide ZV the COMAND
X
controller and, when the
menu item is shown, press W.
To scroll the map: slide XVY, ZVÆ or
X
aVb the COMAND controller.
A crosshair appears on the map. If you slide
it again, the map moves in the
corresponding direction under the
crosshair.
Display = may be the name of a street, for
example, provided the digital map contains
the necessary data. It shows the geo-
coordinate position of the crosshair if the
Geo-coordinates Geo-coordinates display is switched on
( page 106).
Y
Hiding the crosshair and centering the
map on the vehicle position or
destination
Press the % back button twice.
X
The crosshair disappears and the map is
set to the vehicle position.
Map operation and map setting
Centering the map on the vehicle's
position
To show the menu: press W the COMAND
X
controller.
Select
X
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
Select
X
W to confirm or, if the crosshair is shown,
press the % back button.
This hides the crosshair.
Centering the map on the destination
position
This function requires that a route to a
destination has been calculated. If the route
includes waypoints and an intermediate stop,
the map can also be set to these positions.
Full Screen Full Screen
To show the menu: press W the COMAND
X
controller.
Select
X
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
Select
X
press W to confirm.
The crosshair position is set to the relevant
destination.
Position Position in the navigation system
Vehicle Position Map Vehicle Position Map
Position Position in the navigation system
Destination position map Destination position map
103
and press
and
Z