Mercedes-Benz COMAND Operating Instructions Manual page 191

Selecting a channel
Channel search
Turn cVd or slide XVY the COMAND
X
controller while the display/selection
window in the SatRadio display is active.
or
Press the E or F button.
X
COMAND searches in both directions
(ascending and descending) and stops at
the next channel found in the selected
category.
Satellite radio menu
Select Sat Sat in the submenu bar by turning
X
cVd the COMAND controller and press
W to confirm.
The satellite radio menu appears.
Satellite radio
Entering channel numbers directly
Option 1: press the l button.
X
An input menu appears.
Option 2: select Sat Sat in the submenu bar
X
by turning cVd the COMAND controller
and press W to confirm.
Select Enter Channel Enter Channel
X
confirm.
An input menu appears.
Entering the channel
With both options, press the corresponding
X
number buttons on the control unit in
succession.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
You can select the channel from the channel
list (option 1) or via the channel list that
shows the artists and tracks that are currently
being played (option 2).
Select Sat Sat in the submenu bar by turning
X
cVd the COMAND controller and press
W to confirm.
Option 1
Select Channel List Channel List
X
confirm.
The channel list appears.
Select a channel by turning cVd the
X
COMAND controller and press W to
confirm.
189
and press W to
and press W to