Mercedes-Benz COMAND Operating Instructions Manual page 202

Audio CD/DVD and MP3 mode
200
Gracenote Media Database
Introduction
This function is only available in audio CD
mode.
There is a version of
Gracenote® music recognition technology
on the COMAND hard drive. You will
recognize this by the logo which can be seen
in the bottom right-hand corner of certain
audio displays.
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the
®
Gracenote Media Database to identify
unknown audio tracks when in audio CD
mode. This is only possible if the relevant
information is saved in the Gracenote Media
Database and if the "Gracenote Media
Database" function is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
Selecting Gracenote
displayed
®
data to be
Switch on CD mode (
X
Y
Select CD CD by sliding VÆ and turning cVd
X
the COMAND controller and press W to
confirm.
Select Gracenote Media Database Gracenote Media Database
X
turning cVd the COMAND controller and
press W to confirm.
A menu appears.
The # dot indicates the current selection
for the display.
If several entries exist for the CD of a
particular artist, you can select which of the
entries should be shown.
If the inserted CD does not contain any
Gracenote® data, the Gracenote Media Gracenote Media
Database Database menu item is shown in grey and
cannot be selected.
Select an entry by turning cVd the
X
COMAND controller and press W to
confirm.
Switching the Gracenote
on/off
Switch on CD mode (
X
Y
Select CD CD by sliding VÆ and turning cVd
X
the COMAND controller and press W to
confirm.
Select Gracenote Media Database Gracenote Media Database
X
turning cVd the COMAND controller and
press W to confirm.
To switch off the display: select
X
press W to confirm.
In the basic display, Track Track 1
are shown instead of the Gracenote
for example ( page 196).
Y
To switch on the display: select an entry
X
in the menu by turning cVd the COMAND
controller and press W to confirm.
page 195).
by
®
data display
page 195).
by
None None and
1, Track 2 Track 2 etc.
®
data,