Call Lists - Mercedes-Benz COMAND Operating Instructions Manual

Using the speed dial list
138
i Save
Save is shown in gray if the selected list
entry has already been saved.
Select Add Phone No. Add Phone No.
X
confirm.
Select a category for the number, e.g.
X
Home Home, and press W to confirm.
Select a category for the phone, e.g.
X
Mobile Mobile, and press W to confirm.
Select Save. Save
X
The search menu for address book entries
appears.
Search for the desired entry (
X
Press W when you have finished searching.
X
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
You will see a message to this effect.
If five numbers are stored for the entry you
are searching for, a prompt will appear
asking whether you wish to overwrite one
of the existing numbers.
Select Yes Yes or No No
X
If you select Yes Yes, a selection list with the
five existing numbers is displayed.
If you select No, the process will be No
canceled.
Select the number to be overwritten in the
X
list by turning cVd the COMAND controller
and press W to confirm.
COMAND overwrites the selected number
with the new data.
Deleting call lists
If you are using a Bluetooth
not support the PBAP Bluetooth
call lists are generated and managed by
COMAND. You can delete these call lists in
COMAND.
If you download call lists from a Bluetooth
phone that supports the PBAP Bluetooth
and press W to
page 133).
Y
and press W to confirm.
®
phone that does
®
profile, the
®
®
profile, you cannot delete them from
COMAND.
Select

Call Lists

Call Lists in the telephone basic
X
menu by turning cVd the COMAND
controller and press W to confirm.
Select Delete Call Lists Delete Call Lists
X
to confirm.
A prompt appears asking whether you wish
to delete all call lists.
Select Yes Yes or No No and press W to confirm.
X
If you select Yes, the call lists are deleted. Yes
If you select No No, the process will be
canceled.
i
If you delete these call lists from the
mobile phone (see the separate mobile
phone operating instructions), COMAND
updates the call list display the next time it
connects.
Using the speed dial list
Storing an entry
You can assign ten speed dial presets (0 – 9)
to the speed dial list. There are two options
available for this purpose.
Option 1:
Search for a phone book entry in the phone
X
book ( page 133).
Y
If an entry has several phone numbers,
X
select the desired number by turning
cVd the COMAND controller.
Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
A menu appears.
Select Speed Dial Speed Dial by turning cVd the
X
COMAND controller and press W to
confirm.
A menu appears.
and press W