Notes On Discs - Mercedes-Benz COMAND Operating Instructions Manual

Video DVD mode
226
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your COMAND
system may not be equipped with all the
features described.
General information
Automatic picture shutoff
The video image is shown only when the
transmission selector lever is in position P.
If the transmission selector lever is moved out
of position P, the In order not to In order not to
distract you from the traffic distract you from the traffic
situation, situation, the the picture
while the vehicle is in motion while the vehicle is in motion
message appears
As soon as the selector lever of the
transmission is returned to position P, the
video image is shown.
Basic settings
Adjusting the brightness, contrast or
color
In video DVD or video AUX mode, press
X
W the COMAND controller and show the
menu.
Select DVD-V DVD-V by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
A menu appears.
Select Brightness, Brightness
X
turning cVd the COMAND controller and
press W to confirm.
picture is is faded faded out out
Contrast Contrast or Color Color by
Changing the picture format
Press W the COMAND controller to show
X
the menu.
Select DVD-V DVD-V by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
A menu appears.
Select 16:9 Optimized 16:9 Optimized,
X
Widescreen Widescreen and press W to confirm.
The dot in front of the entry indicates the
currently selected format.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
Video DVD mode
Important safety notes
G
WARNING
COMAND is classified as a Class 1 laser
product. Never open the housing. There is a
risk of damage to the eyes due to exposure to
invisible laser radiation if you open the casing,
or if the casing is faulty or damaged.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
G
WARNING
Only when the vehicle is stationary should
you:
load a disc
R
eject a disc
R
There is a risk of being distracted from the
road and traffic conditions if this is done while
the vehicle is in motion.

Notes on discs

! Do not affix stickers or labels to the discs.
They could peel off and damage COMAND.
4:3 4:3 or