Mercedes-Benz COMAND Operating Instructions Manual page 201

Selecting a track using the number
keypad
Press the ¯ key on the number keypad.
X
A numerical entry field appears. The
number of positions offered corresponds to
the number of tracks on the CD/DVD. Only
numbers that correspond to a track
number on the CD/DVD can be entered.
Enter the desired track number using the
X
number keys.
The track plays after the last possible
number is entered.
i
Pressing and holding a number key for
more than two seconds completes the
entry, and the corresponding track is
played.
Selecting a track using music search
Select Current Tracklist Current Tracklist,
X
category and press W to confirm.
Select music via categories (e.g. album,
artist) with the music search function.
If you select a category, COMAND starts a
search for track information if the following
conditions are fulfilled:
the data carriers are inserted or connected
R
the track information from these data
R
carriers is not yet contained in the
COMAND music database.
COMAND imports track information from the
following data carriers:
disc (audio CD/DVD/MP3)
R
memory card
R
Audio CD/DVD and MP3 mode
MUSIC REGISTER
R
USB storage device
R
The Track information is complete. Track information is complete.
message appears once the search is
completed. COMAND stores the music data
in its own database. You can now select the
available music data within the desired
category.
You will find further information on searching
for music in the "Music search" section
( page 204).
Y
In CD/audio DVD/MP3 mode, select
X
Search Search
COMAND controller and press W to
confirm.
The category list appears.
Example: current track list
Select the track by turning cVd the
X
Folder Folder or a
COMAND controller and press W to
confirm.
The basic display appears and the track is
played.
Fast forwarding/rewinding
While the display/selection window is
X
active, slide XVY and hold the COMAND
controller until the desired position has
been reached.
or
Press and hold the E or F button
X
until the desired position is reached.
by sliding VÆ and turning cVd the
199
Z