Showing/Hiding The Menu - Mercedes-Benz COMAND Operating Instructions Manual

To change the map scale: as soon as you
X
turn cVd the COMAND controller, the
scale bar appears.
Turn cVd until the desired scale is set.
X
i
The data is downloaded again from the
server for these functions. This can delay
the display of the weather map.
Showing/hiding the menu in the
weather map
To show: press W the COMAND controller
X
in the weather map.
To hide: slide up ZV the COMAND
X
controller.
Switching to the weather information
display in the map
Display the menu on the weather map
X
( page 165).
Y
Select View View by turning cVd the COMAND
X
controller and press W to confirm.
Weather Display on the map
characteristic
Displays warnings
Hazard Icons Hazard Icons
Radar Map Radar Map Displays the rain radar as
a colored area on the
map
Atmospheric Atmospheric Displays air pressure
with isobars and as a
Pressure Pressure
colored area on the map
Displays the
Temperatures Temperatures
temperatures
Cloud Cover Cloud Cover Displays the clouds
Winds Winds Displays wind direction
with an arrow and wind
speed with coloring
i
The hazard icon display is preset in the
factory. This presetting can be changed in
the Options menu ( page 167).
Y
Select a weather characteristic by turning
X
cVd the COMAND controller and press
W to confirm.
The # dot indicates which weather
characteristic is currently displayed on the
map. You can select one weather
characteristic at a time.
Legend
Display the menu on the weather map
X
( page 165).
Y
Select View View by turning cVd the COMAND
X
controller and press W to confirm.
Select Legend Legend and press W to confirm.
X
The legend is displayed in accordance with
the currently selected weather
characteristic.
To switch back to the information
X
chart: display the menu on the weather
map ( page 165).
Y
Select Display Weather Display Weather
X
confirm.
Memory functions
Storing a location in the memory
You can save locations that are called up
frequently in ten preset positions (0, 1 – 9).
Select the location (
X
Y
Press and hold a number key.
X
When the location is saved, the number of
the selected preset comes before the name
of the place in the caption.
Selecting a location from the memory
Quick select: when the weather display
X
(COMAND) is switched on and an entry is
available, press a number key, e.g. l.
The information chart appears and displays
the weather information.
From the weather memory: select
X
Position Position in the information chart by
Weather
165
and press W to
page 163).