Mercedes-Benz COMAND Operating Instructions Manual page 37

on the data stored on the digital map.
Characters that are no longer available B
are shown in gray.
Select E E , W W , space, Y Y in order and confirm
X
each with W.
Entering characters using the number
keypad
To enter the letter N N : press the p
X
number button twice in quick succession.
The character appears at the bottom of the
display when the key is pressed. The first
available letter is highlighted.
You see which characters you can enter
with that key. Each time the key is pressed,
the next character is selected.
Example: key p:
press once = M
R
press twice = N
R
press three times = O
R
Wait until the character display goes out.
X
The entries matching your input are shown
in the list.
Enter E E , W W , space, Y Y with the corresponding
X
keys.
i
The space is entered using number key
9.
Character entry (navigation)
Further functions in the list with
character bar
To delete characters: press the $
X
button on the control panel.
or
Press the 2 button next to the
X
COMAND controller.
or
Select the 2 icon in the character bar
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
To delete an entry: press $ on the
X
control panel.
or
Press and hold the 2 button next to the
X
COMAND controller until the entire entry
has been deleted.
or
Press and hold the 2 symbol in the
X
character bar and press and hold W the
COMAND controller until the entire entry
has been deleted.
To cancel an entry: select the & symbol
X
in the bottom left of the character bar and
press W to confirm.
or
Press the % back button.
X
The address entry menu appears.
To accept the first list entry: press and
X
hold W the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
35