Storing Stations - Mercedes-Benz COMAND Operating Instructions Manual

Radio mode
184
Selecting a station
Selecting stations via the station
search function
Press the E or F button.
X
or
Turn cVd or slide XVY the COMAND
X
controller while the display/selection
window in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting stations via the station
presets
Quick setting: press a number key, e.g.
X
l.
Directly in the station presets: select
X
Presets Presets by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
or
When the display/selection window is
X
active, press W the COMAND controller.
The station preset memory appears. The
# dot indicates under which preset the
currently selected station is stored.
Select a station by turning cVd and
X
pressing W to confirm or press a number
key, e.g. l.
Selecting stations by entering the
frequency manually
Option 1: press the l button.
X
Option 2: select
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select Enter Frequency Enter Frequency
X
confirm.
Irrespective of the option chosen, an input
menu will appear.
Radio Radio in the radio display
and press W to
Enter a frequency using the number keys.
X
COMAND sets the frequency entered.
Waveband Frequency
AM (MF) 530 – 1700 kHz
FM (VHF) 87.7 – 107.9 MHz
WB (Weather Band) Weather report
channels
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND sets the next lower
frequency.
Storing a station
Storing stations manually
There are ten presets available for the FM and
AM wavebands.
Example: station memory
Quick save: press and hold a number key,
X
e.g. l, until you hear a tone.
The station is stored.