Mercedes-Benz COMAND Operating Instructions Manual page 29

Selecting a menu item
Select the station by turning cVd the
X
COMAND controller and press W to
confirm.
The station is set.
Basic COMAND functions
Switching COMAND on/off
Press the q control knob.
X
A warning message appears. COMAND
calls up the previously selected menu.
i
If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
Switching the sound on or off
Audio/video source sound
Press the 8 button on the COMAND
X
controller or on the multifunction steering
wheel.
The sound from the respective audio or
video source is switched on or off.
i
When the sound is off, the system
displays the , icon in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i
Even if the sound is switched off, you will
still hear navigation system
announcements.
Basic COMAND functions
Switching off navigation
announcements
Navigation announcements: press the
X
8 button during the announcement.
Switching navigation announcements
back on
Press the 8 button again.
X
The navigation announcements are active
again:
if COMAND is switched off/on with the
R
q control knob.
or after starting route guidance
R
Adjusting the volume
Adjusting the volume for the audio or
video source
Turn the q control knob
X
or
Press the W or X button on the
X
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
navigation announcements
R
phone calls
R
voice output of the Voice Control System
R
(see the separate operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
Turn the q control knob
X
or
Press the W or X button on the
X
multifunction steering wheel.
27