Memory Functions; Selecting The Location In The Weather Map - Mercedes-Benz COMAND Operating Instructions Manual

Selecting a state (searching for an area)
To search for an area: select a state, e.g.
X
Florida Florida and press W to confirm.
Select a category, e.g.
X
and press W to confirm.
The information chart shows the weather
forecast for the selected area. The data is
supplied by the nearest weather station.
Selecting the location in the weather
map
Call up the weather map (
X
Move the weather map so that the
X
crosshair is over the desired area
( page 264).
Y
Press W the COMAND controller.
X
The information chart shows the weather
forecast for the selected area. The data is
supplied by the nearest weather station.

Memory functions

Storing the area in the weather
memory
For areas that are frequently called up, 10
presets (0, 1 – 9) are available in the weather
memory.
X
X
X
X
X
X
Daytona Daytona Beach Beach,
i
Selecting an area from the weather
page 264). memory
Y
X
X
Memory functions
In the weather memory: select the area
for the weather forecast (
The selected area is shown at the top in the
status bar.
Select Position Position in the information chart
by turning cVd the COMAND controller
and press W to confirm.
Select Memory Memory and press W to confirm.
Select the preset by turning cVd or sliding
ZVÆ the COMAND controller.
Press and hold W the COMAND controller
until you hear a tone.
The area is entered on the selected preset.
To store rapidly: in the daily forecast
( page 260) press and hold a number key,
Y
e.g. l, until the preset position number
is shown in the status bar in front of the
area name.
You can also use this function:
in the five-day forecast (
R
in the detailed information view
R
( page 261).
Y
From the weather memory: in the
information chart, select
turning cVd the COMAND controller and
press W to confirm.
Select Memory Memory and press W to confirm.
263
page 261).
Y
page 261)
Y
Position Position by