Accessing Your Phone Settings - Ford Escape 2013 Owner's Manual

1. Press OK when the desired selection is
in the display. The system now needs
to know who to send the message to.
2. Scroll to cycle through Phonebook or
Call History entries. You can also
select Enter Number to audibly enter
the desired number.
3. Press OK to enter the desired menu
and scroll to select the specific
contact.
4. Press OK when the contact appears
and press OK again to confirm when
the system asks if you would like to
send the message. Each text message
is sent with the following signature:
"This message was sent from my
<Ford or Lincoln>".
When You Select
Phone Status
Set Ringer
Message Notification
Modify Phonebook
SYNC®

Accessing Your Phone Settings

These are phone-dependent features. Your
phone settings allow you to access and
adjust features such as your ring tone, text
message notification, modify your phone
book and also set up automatic download.
1.
2. Scroll until Phone Settings appears,
3. Scroll to select from the following
See the provider, name, signal power, battery power and
roaming status of your connected phone.
Press OK to select and scroll to view the information. When
done, press OK again to return to the phone status menu.
Select which ring tone sounds during an incoming call (one
of the system's or your phone's).
1. Press OK to select and scroll to hear Ringer 1, Ringer
2, Ringer 3 and Phone Ringer.
2. Press OK to select.
If your phone supports in-band ringing, your phone's ringer
sounds when Phone Ringer is chosen.
Have the option of hearing an audible tone to notify you
when a text message arrives.
1. Press OK to select and scroll between Message Noti-
fication On or Message Notification Off.
2. Press OK to select.
Modify the contents of your phone book (i.e. add, delete,
download). Press OK to select and scroll between:
Add Contacts: Press OK to add more contacts from your
phone book. "Push" the desired contact(s) on your phone.
Refer to your phone's user guide on how to "push"
contacts.
291
Press the phone button.
then press OK.
options:
You Can