General Settings - Interlogix TruVision DVR 12 User Manual

Option
8. Enable DST
From
To
DST Bias
To set up the system time and date:
1. Click the Display Mode Settings icon in the menu toolbar.
2. Select Time. Modify the required settings.
3. Click the Apply button to immediately implement the changes.

General settings

Use the Display settings menu to configure general recorder options on how
information is displayed and accessed such as:
• Change GUI language
• Change the recorder name and address
• Define the monitor resolution
• Enable/disable the login password requirement
• Enable/disable the Wizard
• Manually change the video output format (PAL/NTSC)
• Change the time out period after which the display reverts to showing live
view
• Enable/disable the transparency of the menus on screen
• Enable/disable whether the status icons appear on screen
See Figure 21 and Table 13 on page 76 for the general options available, and
Figure 22 and Table 14 on page 77on page 77 for further options.
The changes are immediately implemented once Apply is clicked to save the
settings.
TruVision DVR 12 User Manual
Description
Manually define DST. If this option is selected, the Auto DST
adjustment option is disabled.
Default format is Disable.
Click the check box to enable or disable daylight savings time
(DST).
Enter the start date and time for daylight savings.
Enter the end date and time for daylight savings.
Set the amount of time to move DST forward from the standard
time.
Default is 60 minutes.
75