Setting Up Motion Detection - Interlogix TruVision DVR 12 User Manual

Modifying the warning buzzer
When an alarm is triggered by the system or a camera, the recorder can be set
up to respond with a warning buzzer. You can modify the time during which the
warning buzzer sounds for both system and camera alarm. Select Alarm >
Advanced Settings and select a buzzer time limit for the system and camera
alarms. Default is mute.

Setting up motion detection

Motion detection is one of the most important features of a recorder. With it there
is no need to manually search through hours of video recordings to find an event.
The recorder can be set up to trigger an alarm if it detects motion and to record it.
You can then search these recorded motion activities for specific incidents. If
enabled, motion detection recording can help increase the number of days your
recorder can record.
You can mask out any areas of motion on an analog camera display that you do
not want to trigger a recording such as a flag on a pole or a moving tree.
Select the level of sensitivity to motion as well the target size so that only objects
that could be of interest can trigger a motion recording. For example, recording is
triggered by the movement of a person but not that of a cat.
You can set up both the schedule and areas sensitive to motion detection for
each camera individually or easily copy the settings of one camera to other
cameras.
Motion detection set up
To set up motion detection:
1. From the menu toolbar, click
Areas covered by the red grid are sensitive to motion detection.
2. Select the analog camera to detect motion. Each camera must be set up
individually.
3. Check Enable Motion
4. Select the areas on-screen to be sensitive to motion.
Click and drag the mouse cursor across the window to deselect areas
sensitive to motion detection.
32
Camera Management
Detection.
> Motion.
TruVision DVR 12 User Manual