Item
Name
5.
Select PTZ command Displays the desired function from the scroll bar: camera, preset,
6.
Open/close menu
7.
Exit
Setting and calling up presets
Presets are previously defined locations of a PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. They are configured
and modified from the PTZ configuration window (see Figure 24 below).
Note:
The PTZ dome camera used must be able to support a preset command.
See Appendix F on page 143 for the complete list of PTZ commands available by
camera protocol.
Figure 24: PTZ configuration window
Table 16: Description of the PTZ configuration window
Item
Name
1.
Save preset
2.
Call preset
3.
Shadow tour toolbar
TruVision DVR 12 User Manual
Description
Centers the PTZ dome camera image. This command is
not supported on all PTZ dome cameras.
Jumps to the home position.
preset tour or shadow tour.
Opens/closes the PTZ command section of the PTZ control
panel.
Exits the PTZ control panel.
Description
Saves preset.
Calls up pre-existing preset.
Starts recording the shadow tour.
81